Montres Outlet

Should you service a watch that runs fine? The video guide

The video guide · 2:20

Chapters

  1. 0:00A watch that runs
  2. 0:12It all comes down to oil
  3. 0:32How often?
  4. 0:50Dismantling
  5. 1:08Oiling and regulating
  6. 1:23Seals and water resistance
  7. 1:39What about quartz?
  8. 1:56Signs that cannot wait

Transcript

Your watch runs perfectly well. Should you still have it serviced? Yes. And the reason comes down to one word: oil. In a mechanical movement, every point of friction gets a tiny drop of oil. Over the years, that oil breaks down and gets dirty. The parts wear, and the watch starts to gain, to lose, or it stops. How often? Makers do not all give the same figure: two or three years for some, around ten years for others. Most often, between three and eight years. The right figure is in your watch's instructions. A full service starts with dismantling. The movement comes out of the case and is taken apart piece by piece. Every part is machine-cleaned, checked, and replaced if it is worn. Then the watchmaker reassembles the movement and lubricates it, point by point, with several different oils and greases. Next, the rate is adjusted, so the watch regains its accuracy. That leaves the case. Seals age too: sweat, chlorine, salt and sunlight all wear them down. They are replaced, and the watch goes through a pressure test for water resistance. And a quartz watch? It has oiled gears and seals too. One maker recommends a service every three to four years. And at every battery change, at least have the seals replaced. Some signs should not wait for the planned date: a watch that gains or loses clearly more than before, that stops, mist under the crystal, or a hard knock. Then, straight to the watchmaker. Discover a whole selection of watches at Montres Outlet.

More video guides